DynoSeal Interior/Exterior

DESCRIPTION
Safecoat DynoSeal is a sophisticated, low odor, all weather, waterproof, vapor proof coating and sealer that remains flexible for years. It is highly resistant to flame spread and temperature change, and when cured is also highly resistant to gasoline, oil, grease, fungi, acids and alkalines. It has very low odor upon application and is odor free once cured.

BENEFITS
Versatile, waterproof, vapor proof sealer. If properly installed can last up to ten years. Low odor, non-offensive to installer and occupant. Safely used by and for the chemically sensitive. Very low VOC content, meets or exceeds all federal and state air quality regulations, including California. Contains no formaldehyde.

USE ON
Safecoat DynoSeal is recommended for use on seamless roofs and as a deck coating and underlayment for shower stalls, pools, tubs and saunas. It is also recommended for use in repairing roofs, flashing, shingles and metal seams and as a vapor barrier against moisture and radon from below-grade foundations. It is an excellent sound deadener. Safecoat DynoSeal adheres well to concrete, block, metal, wood and hot mop asphalt.

More Info (PDF)
Dynoseal
MSDS

DynoSeal Driveway/Asphalt Sealer

DESCRIPTION
DynoSeal Driveway/Asphalt Sealer is a low odor elastomeric sealer and topcoating for asphalt surfaces. It helps to reduce the offgassing and offensive smells generated by new asphalt, while preserving and renewing existing asphalt surfaces.

USE ON
DynoSeal Driveway/Asphalt Sealer can be used on unsealed or previously sealed asphalt surfaces. It can also be mixed with sand to make an asphalt driveway patch for small areas.

More Info (PDF)
DynoSeal Driveway/Asphalt Sealer
MSDS

DynoFlex
Natural Tan

DESCRIPTION
Safecoat DynoFlex is a unique, water based, low odor elastomeric sealer that comes in a paste-like compound for sealing seams, joints and cracks in new and old heating and air conditioning ducts, and for repairing metal roofs and asphalt shingles. Also comes in a sprayable form that can be used over Safecoat DynoSeal as a topcoat for roofs and decks.

USE ON
Safecoat DynoFlex is recommended for new and old heating and air conditioning ducts, metal roof cracks, damaged asphalt shingles, mobile home roofs and similar areas. In the sprayable form, it is recommended as a topcoat for Safecoat DynoSeal.

BENEFITS
Safecoat DynoFlex is highly resistant to harsh weather and temperature changes. It remains flexible and prevents leaks even after exposure to the elements or contraction due to weather It is resistant to gasoline, oil, grease, fungi, acids, alkalines and flame spread. Safecoat DynoFlex is also a superb sound deadener.

More Info (PDF)
DynoFlex Natural Tan
MSDS

DynoFlex RoofGuard

DESCRIPTION
Safecoat DynoFlex RoofGuard is a unique, water based, low odor elastomeric coating which can be used on composition roofs, rock roofs, cured hot melt asphalt, new polyurethane foam, properly primed wood, metal, masonry, tilt up concrete and mobile homes. It reflects ultraviolet light and will lower the inside temperature from 10-20 degrees F. DynoFlex RoofGuard has excellent flexibility (up to 300%), excellent water resistance and bridges small cracks very well.

More Info (PDF)
DynoFlex Roof Guard
MSDS