Wallboard Primecoat HPV
Safecoat New Wallboard Primecoat HPV is a premium quality, fast curing, flat finish primer specially formulated to provide a superior prime coat over interior surfaces such as new gypsum wallboard and textured sheetrock. It equalizes the absorption rate of topcoat paints over a variety of surfaces with different porosities, and helps to eliminate decorating problems over textured sheetrock and tape joints on wallboard.
USE ON
New wallboard and textured sheetrock. May also be used on specialty porous and absorptive materials like Gridcore®, certain ceiling tiles, etc.
BENEFITS
Solves finishing problems such as telegraphing or joint banding by equalizing porosity and texture, filling voids left by today's building materials, so that top coats cover more evenly.
Applies economically and easily, dries fast for quick recoat under most circumstances.
Low odor, non-offensive to installer and occupant.
Minimal outgassing, fights indoor air pollution by sealing in the outgassing from the substrate.
Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.
Contains no formaldehyde.
More Info (PDF)
Primecoat HPV
MSDS
Metalcoat Acrylic
Metal Primer
AFM MetalCoat Acrylic Metal Primer is a thermoplastic acrylic emulsion primer fortified with rust inhibiting pigments. Designed for use on non-ferrous metal, iron, steel, aluminum, galvanized and masonry. It is not recommended for copper. Provides a tough, flexible film, producing outstanding corrosion resistance and excellent adhesion. May be used on interior or exterior, including marine atmospheres. Very low odor and low VOC, it is one of the least toxic metal primers available, formulated without the heavy metals and other hazardous ingredients commonly used.
USE ON
Interior and exterior metal surfaces such as steel, galvanized iron and aluminum. May be left as a finish in a three primer coat application. May be recoated with a variety of other finishes, and is an excellent foundation for Safecoat paints, today's premium not toxic coating.
More Info (PDF)
Metalcoat Acrylic Metal Primer
MSDS
Flat Enamel
Interior
Safecoat Flat is a premium quality, fast curing enamel designed for interior surfaces where a flat finish and superior film formation properties are needed. It is particularly well suited for areas in which the health of the occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, or ethylene glycol.
USE ON
Walls, ceilings, wallboard, properly cured and primed plaster, masonry and primed metal.
BENEFITS
Durable, flat finish.
Safely used by and for the chemically sensitive.
Low odor, non-offensive to installer and occupant.
Fights indoor air pollution, seals in the outgassing from the substrate.
Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.
More Info (PDF)
Safecoat Flat
MSDS
Flat Zero VO
Safecoat Flat Zero VOC is a premium quality,
fast curing paint designed for interior surfaces where a flat finish
and superior film formation properties are needed. It is particularly
well suited for areas in which the health of the occupants is a
concern: schools, hospitals, homes, offices - anywhere people
want to reduce their exposure to toxic chemicals. Safecoat paints
have almost no odor during application and are odor free once
cured. They contain no formaldehyde, ammonia, crystalline silica,
or ethylene glycol.
USE ON
Walls, ceilings, wallboard, properly cured and primed
plaster, masonry and primed metal.
BENEFITS
Durable, flat finish.
Safely used by and for the chemically sensitive.
Low odor, non-offensive to installer and occupant.
Fights indoor air pollution, seals in the outgassing from the substrate.
No VOC content, meets or exceeds all federal and state air quality regulations, including California.
More Info (PDF)
Safecoat Zero VOC Flat
MSDS
Eggshell Enamel
Interior
Safecoat Eggshell Enamel is a premium quality, fast curing enamel paint designed for interior surfaces where a durable eggshell finish and superior film formation properties are needed. It is well suited for areas in which the health of the occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, or ethylene glycol.
USE ON
Walls, ceilings, wallboard, properly cured and primed plaster, masonry and primed metal.
BENEFITS
Durable eggshell appearance.
Safely used by and for the chemically sensitive.
Low odor, non-offensive to installer and occupant.
Fights indoor air pollution, seals in the outgassing from the substrate.
Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.
More Info (PDF)
Safecoat Eggshell
MSDS
SemiGloss Enamel
Interior
Safecoat SemiGloss Enamel is a premium quality, fast curing enamel paint designed for interior surfaces where a durable semi-gloss finish and superior film formation properties are needed. It is particularly well suited for areas in which the health of the occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, or ethylene glycol.
USE ON
Walls, ceilings, wallboard, properly cured and primed plaster, masonry and primed metal.
BENEFITS
Durable, semigloss finish.
Safely used by and for the chemically sensitive.
Low odor, non-offensive to installer and occupant.
Fights indoor air pollution, seals in the outgassing from the substrate.
Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.
More Info (PDF)
Safecoat Semi-gloss
MSDS
SemiGloss Zero VOC
Interior
Safecoat SemiGloss Zero VOC is a premium quality, fast curing enamel designed for interior surfaces where a semi-gloss finish and superior film formation properties are needed. It is particularly well suited for areas in which the health of the occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, or ethylene glycol.
USE ON
Walls, ceilings, wallboard, properly cured and primed plaster, masonry and primed metal.
BENEFITS
Superior, durable finish. Fully tintable to all pastel colors (some colorant systems may add a small amount of VOC).
Safely used by and for the chemically sensitive.
Low odor, non-offensive to installer and occupant.
Fights indoor air pollution, limits outgassing from the substrate.
Zero VOC content, meets or exceeds all federal and state air quality regulations, including California.
More Info (PDF)
Safecoat Zero VOC
Semi-gloss
MSDS
Semi-Gloss Cabinet & Trim Enamel
Safecoat Cabinet & Trim Enamel is a premium quality, fast curing enamel paint specially formulated for interior surfaces where exceptional durability, abrasion resistance and block resistance are required. Its durable finish and superior film formation properties make it particularly well suited for kitchen and bathroom cabinets and walls. Like all Safecoat paints, it can be used wherever the health of the occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals.
USE ON
Cabinets, trim, doors, wood and any other surfaces on which the superior qualities of this paint are desired.
BENEFITS
Extremely durable, semi-gloss finish.
Resistant to blocking. æ Safely used by and for the chemically sensitive.
Low odor, non-offensive to installer and occupant.
Fights indoor air pollution, seals in the outgassing from the substrate.
Very low VOC content, meets or exceeds all federal and state air quality regulations, including California.
More Info (PDF)
Safecoat Cabinet &
Trim Enamel
(Eggshell and Semi-Gloss)
MSDS MSDS
All Purpose Exterior Satin
Safecoat All Purpose Exterior Satin is a sophisticated, premium quality, fast curing paint designed for a variety of exterior surfaces where a durable, weather resistant finish and superior film formation properties are needed. It is well suited for buildings in which the health of occupants is a concern: schools, hospitals, homes, offices - anywhere people want to reduce their exposure to toxic chemicals. It is blister and fade resistant, has excellent hide, extremely low voc for sustainability and pollution reduction, and cleans up easily with soap and water. Safecoat paints have almost no odor during application and are odor free once cured. They contain no formaldehyde, ammonia, crystalline silica, ethylene glycol or other highly toxic ingredients.
USE ON
Exterior walls and trim made of wood, stucco, masonry, primed metal and other typical surfaces.
BENEFITS
Durable satin appearance.
Safely used by and for the chemically sensitive.
Extremely low odor.
Very low VOC content for sustainability and pollution reduction.
Apply at low temperatures - down to 40 degrees.
Fade and chalk resistant
More Info (PDF)
Safecoat All Purpose
Exterior Satin
MSDS
|
